HomeMy WebLinkAboutStructural CalculationsSTATE OF COLORADO
FACTORY BUILT NON RESIDENTIAL APPLICATION
Fee due with application -Not subject to return Mar 2013
Name of Manufacturer:
Wedge Energy Services
Plant Mailing Address:
Wedge Energy Services
Plant street address: PiantT.6. Number:
461 N Broadway Joshua, TX 76058 4272
461 N Broadway Joshua, TX 76058
Contact Person/email address:
Matt McCarty: matt.mccarty@wedge-es.com
Plant Telephone:
Fax No:
Telephone No:
817-426-9810
817-426-9777
817-426-9806
Third Party Inspection Agency:
NTA Inc.
Mailing Address:
P.O. Box 490 Nappanee, IN 46550
Telephone No:
574-773-7975
Fax No:
574-773-2732
Yes 2012 I -Code Compliant Roof snow load
Yes 2011 NEC Compliant Wind Design Speed
100 PSF
130 MPH
Yes 2012 IECC Compliant Seismic Category B
Yes 2009 IECC Compliant
Floor Design Load
Occupancy
Eke: > 200 amp NO
3 phase
NO
125 PSF
Special occupancy(NEC)
NO
Fee Schedule
Total foota.e
Amount
Model Name/No.
8x14LEVELI
Annual Registration Fee (must be accompanied by new/updated
QA Manual, minimum 2 copies -maximum 3 copies)
$500.00/per factory location
Fee Calculator for Plan Approvals=
(Building Square footage) x (factor indicated below):
Manufactured portion only
State of Colorado
Division of Housing
October 18, 2013
,' DIY C C%ir-) .
`1..."
(''I
[-
Plan Approval Fee- $0.25/sq. ft. (Finished floor area)
$0.10/sq. ft. (Unfinished floor area)
i.e. garage, unfinished loft
minimum 2 copies -maximum 3 copies,.
112
Minimum Fee for Plan Approvals- $160.00
$160.00
Lf
PLANS APPROVED
Additional Plan Set- $0.10/sq.ft.
Minimum Fee for Additional Plan Set- $50.00
Plan Approval Number
6886
Plan Revision- $0.10/sq.ft. (Space revised)•
FedEx or UPS No. (If overnight shipping
of approved plans requested)
Minimum Fee for Plan Revision- $50.00
TOTAL AMOUNT SUBMITTED:
$160.00
EXPIRES: August 1, 2014
MANUFACTURER CERTIFIES that only approved equipment and materials will be used and the installations shall be made in accordance with approved plans
and applicable codes and provisions of the Colorado Division of Housing. Manufacturer agrees to in -plant inspection of units manufactured under the above plan
approval. Application shall be made for and insignia affixed to each factory built non residential unit that is subject to Colorado statutes and which is manufactured or is to be
sold, offered for sate, or occupied in the Slate of Colorado.
DIV. OF HOUSING, 1313 SHERMAN STREET, RM 321, DENVER, CO. 80203 (303) 866-4616 Fax 866-3072
Structural Calculations
L&S Pro -Line
8' 0"x l 4'0"
Prefabricated
Building
Colorado
September, 2013
Project No. 13232
Bradley J. Isbell, P.E.
Bradley J. Isbell, P.E
October 24, 2013
Shannon Thornton
L&S Pro -Line
2239 Saint Beulah
Montgomery, Texas 77316
RE: 8'-0"x14'-0" Prefabricated Building Located in Colorado
Dear Mr. Thornton:
This is to certify that we have analyzed the 8'-0"x14'-0" prefabricated building. The building was analyzed for the
location in Colorado that you provided us, with the following criteria:
8' -0"x14' -0"x7'-10" high, Prefabricated Metal Building
S -1 -Storage Shelter
One Story, 112 Square Feet
Construction Type VB
Structural Building Codes: 2012 International Building Code; ASCE 07-10
The building was also designed for the following design loads:
Floor Dead Load: 11 psf
Floor Live Load: 125 psf
Roof Dead Load: 10 psf
Roof Snow Load: 100 psf
Wind Speed: 130 mph
Seismic Design Category: B
Seismic Response Coefficients: Sds=0.333 g Sd1=0.072 g
Refer to the attached calculations for more detailed design criteria and the calculations for the building. We have
also included a sealed design sheet for your drawings.
Based on our calculations, the building in our professional opinion is designed to withstand the code design loads for
the location you supplied in Colorado.
Thanks,
64,4,e
Brad Isbell, P.E.
Bradley J. Isbell, P.E.
1405 W. Chapman, Sanger, Texas 76266 P 940-458-7503 F 940-458-7417 W