HomeMy WebLinkAboutEnvelope Compliance Certificate 06.04.2018Generated by COMcheck-Web Software
Envelope Compliance Certificate
Section 1: Project Information
Energy Code: 2009 IECC
Project Title:
Project Type: New Construction
Construction Site:
Building Location (for weather data):
Climate Zone:
Building Use: A0ivity1yp .(s)
Owner/Agent: Designer/Contractor:
Rifle, Colorado
5b
Floor Area
Section 2: Envelope Assemblies and Requirements Checklist
E. vnE. elo.e
TBD: No.envelopee__assemblies specified
Envelope Assemblies:
Component Name/Description
Simple saver Roof: Metal Building, Standing Seam,
Ext. Wall: Metal Building Wall, Double Layer Mineral Fiber,
Gross Cavity Cont. Proposed Budget
Area or R -Value R -Value U -Factor U-Factor(a)
Perimeter
3200
2400
25.0 19.0 0.027
25.0 13 0 0.033
0.055
0.069
(a) Budget U -factors are used for software baseline calculations ONLY, and are not code requirements.
Air Leakage, Component Certification, and Vapor Retarder Requirements:
u 1. All joints and penetrations are caulked, gasketed or covered with a moisture vapor -permeable wrapping material installed in accordance
with the manufacturer's installation instructions.
Li 2. Windows, doors, and skylights certified as meeting leakage requirements.
O 3. Component R -values & U -factors labeled as certified
Li 4. No roof insulation is installed on a suspended ceiling with removable ceiling panels.
O 5. 'Other' components have supporting documentation for proposed U -Factors.
❑ 6. Insulation installed according to manufacturer's instructions, in substantial contact with the surface being insulated, and in a manner that
achieves the rated R -value without compressing the insulation.
u 7. Stair, elevator shaft vents, and other outdoor air intake and exhaust openings in the building envelope are equipped with motorized
dampers.
❑ 8. Cargo doors and loading dock doors are weather sealed.
u 9. Recessed lighting fixtures installed in the building envelope are Type IC rated as meeting ASTM E283, are sealed with gasket or caulk.
u 10.Building entrance doors have a vestibule equipped with self-closing devices
Exceptions:
J Building entrances with revolving doors.
J Doors not intended to be used as a building entrance
❑ Doors that open directly from a space less than 3000 sq. ft. in area.
❑ Doors used primarily to facilitate vehicular movement or materials handling and adjacent personnel doors.
J Doors opening directly from a sleeping/dwelling unit.
Project Title:
Data filename'
Report date: 06/04/18
Page 1 of 6