HomeMy WebLinkAboutLP Burner NozzleJim Wilson
From: Lewis, Robert (United Companies) <robert.lewis@unitedco.com>
Sent: Wednesday, December 30, 2020 9:43 AM
To: Jim Wilson
Subject: Fwd: [External] [EXT] RE: LP Burner Nozzle
Jim, below is the response from the burner manufacturer regarding the LP gas nozzle. Hopefully this answers your
question. We do have the regulators in and adjusted since the last time you were on site. Additionally I have requested
I formation from the plumber on the regulators themselves and will forward that along as soon as I have it. Thanks for
all your help!
Sent from my iPhone
Begin forwarded message:
From: Patrick Briggs <PBriggs@meekerequipment.com>
Date: December 30, 2020 at 6:32:20 AM MST
To: Jeff Meeker <JMeeker@meekerequipment.com>, "Lewis, Robert (United Companies)"
<robert.lewis@unitedco.com>
Cc: Jim Hurlburt <Jim@meekerequipment.com>
Subject: [EXT] RE: LP Burner Nozzle
Robbie,
Hello my name is Patrick I'm with meeker equipments service department. The model 200 burner does
burn LP gas vapor. The LP gas vapor is regulated with a adjustable gas regulator. That regulator works in
conjunction with a non adjustable Gas orifice ring. The regulator is where we control the amount of flow
and pressure to the gas orifice ring. That burner is designed to have a max of 14 inch of water column
being supplied to the regulator. That regulator will allow the burner to be properly set for clean safe
combustion. That regulator takes that 14 inwc and steps it down to a range of (4 to 8 inwc). I hope this
helps answer your questions.
Sent from my Verizon, Samsung Galaxy smartphone
Original message
From: Jeff Meeker <JMeeker@meekerequipment.com>
Date: 12/30/20 7:03 AM (GMT-05:00)
To: "Lewis, Robert (United Companies)" <robert.lewis@unitedco.com>
Cc: Jim Hurlburt <Jim@meekerequipment.com>, Patrick Briggs <PBriggs@meekerequipment.com>
Subject: RE: LP Burner Nozzle
Robbie,
Derek is not your contact anymore for the IOT products. In the meantime, you can
communicate with me. I will get back to you with what I can come up with.
1
Jeff Meeker
215-828-2651 mobile
From: Lewis, Robert (United Companies) <robert.lewis@unitedco.com>
Sent: Tuesday, December 29, 2020 4:57 PM
To: Derek Garrett <DerekGarrett@meekerequipment.com>
Subject: LP Burner Nozzle
Derek, our county inspector needs me to provide something stating that the burner nozzle el we have
installed on our Model 200 burner is jetted or can be adjusted to appropriately account for the use of
liquid propane. Can you provide me with documentation or an email that I can forward along to the
inspector please?
Robbie Lewis
Ready Mix Northern Area Manager
West Division
United Companies & Telluride Gravel
A CRH COMPANY
2273 River Road
Grand Junction, CO 81505
O +1 (970) 243-5994
C +1 (970) 270-1781
E Robert.Lewis@unitedco.com
www.united-gj.com
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you are expecting this email and know the contents are safe. ATTENTION: Ce courriel vient de
I'exterieur de l'entreprise. Ne cliquez pas sur les liens, et n'ouvrez pas les pieces jointes, a moins que
vous ne connaissiez I'expediteur du courriel et savez que le contenu est securitaire.
2
z
/K.0 77
Lu
cc
w